In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and tricks which you can use.
If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other areas of the home, you will need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up that will look a little scary at first, but it’s really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from https://dogsrecommend.com/ the cardboard, so you will have to cut around the edge of the mask so you get something which looks like a cone. The main thing here is to be realistic with what type of paper plate that you’re using.
Then you will have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so you can make certain that nothing will leak once you put the mask on. Be sure the edges are cut so that the edges aren’t sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.
Don’t worry too much about the paint getting stuck into your mask. It’s easy to remove it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint after you are done, so that you don’t wind up with smudges or smears on your dog.
Then it is time to glue the mask onto your dog’s head. First you will need to make sure that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you can start to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the base of the mask and fold it over. Be certain it’s quite powerful and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you’ve got the mask snugged securely onto the face of your dog. Do not make the folds too large or else it might look messy. Once you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask onto the dog. Be sure the ears are level and be sure that it’s not too short or long as this can cause some issues with the mask slipping off the dog’s face.
If you are using a dog mask as your dog protection, you’ll need to do some sanding to be certain it’s secure on your dog. You can accomplish it by sanding off any excess paper which might have been removed from your mask.